Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 78,8kW prp ; 86,8kW standby Manufacturer: YANMAR Model: 4F104SM3.GL Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged Number of cylinders and arrangement: 4-L Bore and Stroke: 104 x 132 mm Displacement: 4,5 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 17,5:1 Fuel Consumption ESP: 24 l/h Fuel Consumption 100% PRP: 21,6 l/h Fuel Consumption 80 % PRP: 15,4 l/h Fuel Consumption 50 % PRP: 10,9 l/h Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 12,8 L Total coolant capacity: 18,5 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 70,3 mm Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Hot parts protection Moving parts protection Radiator water level sensor (Optional) HTW sender (Optional) LOP sender (Optional)

Alternator

Generator: STAMFORD Model: UCI224G Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-vibration shock absorbers Fuel tank Fuel level gauge External emergency stop switch Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Watertight chassis (acts as a double barrier against liquid retention) Fuel tank drain plug Chassis drain plug Chassis ready for future mobile kit installation Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Versatility to assemble a high capacity chassis with a metallic fuel tank IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Battery Switch (Optional) - EXHAUST SYSTEM. Maximum exhaust temperature: 510 ºC Maximum allowed back pressure: 5 kPa Exhaust Flange Size (external diameter): 90 mm Heat dissipated by exhaust pipe: 780 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 388 m3/h Cooling Air Flow: 2,4 m3/s Alternator fan air flow: 0,281 m3/s - STARTING SYSTEM. Starting power: 3 kW Starting power: 4,08 CV Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 240 L

Dimensions

- DIMENSIONS. Length: 4.122 mm Height: 2.238 mm Width: 1.857 mm Maximum shipping volume: 17,13 m3 Weight with liquids in radiator and sump: 1.908 kg Fuel tank capacity: 240 L Autonomy: 16 Hours Sound pressure level: 69 ± 2,4 dB(A)@7m