Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 86kW prp ; 96kW standby Manufacturer: BAUDOUIN Model: 4M10G6D0.S Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 4-L Bore and Stroke: 105 x 118 mm Displacement: 4,087 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: API CI-4 or ACEA E7 Compression Ratio: 17.5 : 1 Fuel Consumption ESP: 24,43 l/h Fuel Consumption 100% PRP: 21,25 l/h Fuel Consumption 75 % PRP: 16,01 l/h Fuel Consumption 50 % PRP: 10,58 l/h Fuel Consumption 25 % PRP: 6,02 l/h Lube oil consumption with full load: 0,1 % of fuel consumption Total oil capacity including tubes, filters 13 L Total coolant capacity: 9,4 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 70 mm Diesel engine 4-stroke cycle Water-cooled 12V electrical system 24V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECP34.2S4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 570 ºC Exhaust Gas Flow: 19,01 m3/min Maximum allowed back pressure: 50 mbar - NECESSARY AMOUNT OF AIR. Cooling Air Flow: 2,91 m3/s Alternator fan air flow: 0,487 m3/s - STARTING SYSTEM. Starting power: 3,8 kW Starting power: 5,17 CV - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 250 L

Dimensions

- DIMENSIONS. Fuel tank capacity: 250 L Autonomy: 16 Hours