HRFW-85 T5

Mobile Power / HR RANGE

HRFW-85 T5

Rental

Prime power88 kVA
Standby power96 kVA

TECHNICAL DATA

Specifications

Model code
G-1667-1-3-1
Engine
FPT_IVECO
Alternator
MECC ALTE
Fuel
Diesel
Frequency
50 Hz
Phase
Three phase
Emissions
STAGE 3A
Version
Rental
Prime power
70 kW
Standby power
77 kW

CONFIGURATION

Available voltages

VoltageFrequencyPhaseAlternatorDatasheet
400/230 V 50 Hz Three phase MECC ALTE —

INCLUDED

Equipment

Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 71,9kW cop ; 89,9kW prp ; 98,9kW standby Manufacturer: FPT_IVECO Model: N45.TE2P Engine Type: 4-stroke diesel Injection Type: Direct, common rail Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 4-L Bore and Stroke: 104 x 132 mm Displacement: 4,5 L Cooling System: Coolant Lube Oil Specifications: SAE 15W40-CLASS T2; ACEA E7/04 Compression Ratio: 17,5:1 Fuel Consumption ESP: 24,2 l/h Fuel Consumption 100% PRP: 22,3 l/h Fuel Consumption 80 % PRP: 18,2 l/h Fuel Consumption 50 % PRP: 11,9 l/h Lube oil consumption with full load: 0,1 % of fuel consumption Total oil capacity including tubes, filters 12,8 L Total coolant capacity: 18,5 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECP34.1S4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-leakage chassis, predisposed to retain liquids (retention tray) Manhole for fuel tank cleaning and drainage Manhole for chassis cleaning Oversized chassis to protect the bodywork Slide carriage and brackets for transportation with forklift Tilting cap in the exhaust Manhole to fill the radiator Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Versatility to assemble a high capacity chassis with a metallic fuel tank External filling of the fuel tank with safety key Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Mechanized for power cable output Door with window to visualize control panel, alarms and measurements Pressure locks IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Aditional silencer (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Power panel with built-in circuit breaker plates Safety relay in output terminal board (thermal magnetic trip and alarm in control unit) Battery Switch M12 control panel with electronic DSE 7310 control unit and switched emergency stop Socket boxs IP67 Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum allowed back pressure: 10 kPa Exhaust Flange Size (external diameter): 90 mm Heat dissipated by exhaust pipe: 608 KCal/Kwh - NECESSARY AMOUNT OF AIR. Alternator fan air flow: 0,487 m3/s - STARTING SYSTEM. Recommended battery: 44 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 240 L Other fuel tank capacities: 390, 850, 240 L

Dimensions

- DIMENSIONS. Length: 2.810 mm Height: 1.782 mm Width: 1.150 mm Weight with liquids in radiator and sump: 1.746 kg Fuel tank capacity: 240 L Autonomy: 13 Hours Sound pressure level: 69 ± 2,4 dB(A)@7m