Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 384,5kW prp ; 423kW standby Manufacturer: FPT_IVECO Model: C13TE3A Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 135 x 150 mm Displacement: 12,88 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 16,5:1 Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 35 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 108 mm Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (visible level) Dry air filter Remote radiator Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: STAMFORD Model: S5L1S.C4 Poles: 4 Connection type (standard): Star-series Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- CONTAINER VERSION. Soundproofing provided by high-density volcanic rock wool High mechanical resistance Low level of noise emissions System of interior lighting Door with window to visualize control panel, alarms and measurements Reinforced lifting points for crane hoisting and lower ones for transportation by forklift Residential steel silencer with -35dB attenuation and tilting cap in the exhaust Anti-vibration shock absorbers Steel chassis Manual oil extraction pump Robust construction designed for continuous or emergency applications Stainless steel fittings Emergency stops Easy access to the power connection Reinforced chassis for heavy range Silent-block with anti-corrosion protection between the genset and the chassis Easy access to fill radiator through the roof 50L tank for automatic oil replenishment 10-foot container External connection to fuel tank 3-way valve for external fuel supply (available in 1/2" and 3/8" fittings)

Installation

- ELECTRICAL SYSTEM CONTAINER. Control panel and emergency stop button Battery charger Heating resistor Power panel Battery charge alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm) Maintenance-free and anti-explosion battery Battery isolator - EXHAUST SYSTEM. Maximum exhaust temperature: 450 ºC Exhaust Gas Flow: 0,684 kg/s Maximum allowed back pressure: 50 mbar Heat dissipated by exhaust pipe: 734 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 1974 m3/h Alternator fan air flow: 1,3 m3/s - STARTING SYSTEM. Starting power: 6 kW Starting power: 8,16 CV Recommended battery: 185 x 2 Ah Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 500 L

Dimensions

- DIMENSIONS. Length: 2.991 mm Height: 2.591 mm Width: 2.438 mm Maximum shipping volume: 18,89 m3 Weight with liquids in radiator and sump: 6.651 kg Fuel tank capacity: 500 L