Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 522kW prp ; 577kW standby Manufacturer: FPT_IVECO Model: CR16 TE1W Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 141 x 170 mm Displacement: 15,9 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 16,5:1 Fuel Consumption ESP: 139,07 l/h Fuel Consumption 100% PRP: 124,88 l/h Fuel Consumption 80 % PRP: 100,12 l/h Fuel Consumption 50 % PRP: 64,42 l/h Lube oil consumption with full load: 0,2 % of fuel consumption Total oil capacity including tubes, filters 38 L Total coolant capacity: 66,5 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: STAMFORD Model: S5L1S.E4 Poles: 4 Connection type (standard): Star - Parallel Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-leakage chassis, predisposed to retain liquids (retention tray) High capacity fuel tank, with contention base and easy external filling Manhole for fuel tank cleaning and drainage Manhole for chassis cleaning Oversized chassis to protect the bodywork Slide carriage and brackets for transportation with forklift Tilting cap in the exhaust Manhole to fill the radiator Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Watertight chassis (acts as a double barrier against liquid retention) Chassis drain plug Chassis ready for future mobile kit installation Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Mechanized for power cable output Door with window to visualize control panel, alarms and measurements Pressure locks IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Power panel with built-in circuit breaker plates Safety relay in output terminal board (thermal magnetic trip and alarm in control unit) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 554 ºC Maximum allowed back pressure: 7 kPa Exhaust Flange Size (external diameter): 160 mm - NECESSARY AMOUNT OF AIR. Intake air flow: 2995 m3/h Cooling Air Flow: 13,05 m3/s Alternator fan air flow: 1,3 m3/s - STARTING SYSTEM. Starting power: 5,5 kW Starting power: 7,48 CV Recommended battery: 185 Ah Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 2.090 L

Dimensions

- DIMENSIONS. Length: 4.602 mm Height: 2.809 mm Width: 1.850 mm Maximum shipping volume: 23,91 m3 Weight with liquids in radiator and sump: 6.218 kg Fuel tank capacity: 2.090 L Autonomy: 21 Hours Sound pressure level: 80 ± 2,4 dB(A)@7m