HIMOINSA

Mobile Power / HR RANGE

HRFW-160 T5

Rental

Prime power157 kVA
Standby power173 kVA

TECHNICAL DATA

Specifications

Model code
G-213-1-1-1
Engine
FPT_IVECO
Alternator
STAMFORD
Fuel
Diesel
Frequency
50 Hz
Phase
Three phase
Emissions
STAGE 2
Version
Rental
Prime power
125 kW
Standby power
138 kW

CONFIGURATION

Available voltages

VoltageFrequencyPhaseAlternatorDatasheet
400/230 V 50 Hz Three phase STAMFORD —

INCLUDED

Equipment

Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 135,9kW prp ; 150,2kW standby Manufacturer: FPT_IVECO Model: NEF67TM3A Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 104 x 132 mm Displacement: 6,7 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 17,5 : 1 Fuel Consumption ESP: 39 l/h Fuel Consumption 100% PRP: 36 l/h Fuel Consumption 80 % PRP: 29 l/h Fuel Consumption 50 % PRP: 18 l/h Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 17,2 L Total coolant capacity: 25,5 L Governor Type Mechanical Air Filter Type Dry Inner diameter exhaust pipe: 70 mm Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Hot parts protection Moving parts protection

Alternator

Generator: STAMFORD Model: UCI274F Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-leakage chassis, predisposed to retain liquids (retention tray) Manhole for fuel tank cleaning and drainage Manhole for chassis cleaning Oversized chassis to protect the bodywork Slide carriage and brackets for transportation with forklift Tilting cap in the exhaust Manhole to fill the radiator Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Versatility to assemble a high capacity chassis with a metallic fuel tank External filling of the fuel tank with safety key Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Mechanized for power cable output Door with window to visualize control panel, alarms and measurements Pressure locks IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Power panel with built-in circuit breaker plates Safety relay in output terminal board (thermal magnetic trip and alarm in control unit) Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Battery Switch (Optional) - EXHAUST SYSTEM. Maximum exhaust temperature: 570 ºC Exhaust Gas Flow: 0,205 kg/s Maximum allowed back pressure: 5 kPa Exhaust Flange Size (external diameter): 120 mm Heat dissipated by exhaust pipe: 688,9 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 586 m3/h Cooling Air Flow: 3,8 m3/s Alternator fan air flow: 0,514 m3/s - STARTING SYSTEM. Starting power: 3 kW Starting power: 4,08 CV Recommended battery: 100 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 450 L Other fuel tank capacities: 600, 1.100, 450 L

Dimensions

- DIMENSIONS. Length: 3.360 mm Height: 2.000 mm Width: 1.250 mm Maximum shipping volume: 8,4 m3 Weight with liquids in radiator and sump: 2.260 kg Dry weight: 0 kg Fuel tank capacity: 450 L Autonomy: 16 Hours Sound pressure level: 68 ± 2,4 dB(A)@7m