Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 94kW prp ; 94kW standby Manufacturer: FPT_IVECO Model: F36.ETVP02.A94 Engine Type: 4-stroke diesel Injection Type: Direct, common rail Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 4-L Bore and Stroke: 102 x 110 mm Displacement: 3,6 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: 10W-40 (API CJ-4, CK-4) Compression Ratio: 18,5:1 Fuel Consumption ESP: 23,5 l/h Fuel Consumption 100% PRP: 23,5 l/h Fuel Consumption 80 % PRP: 18,4 l/h Fuel Consumption 50 % PRP: 11,5 l/h Fuel Consumption 25 % PRP: 6,5 l/h Lube oil consumption with full load: 0,25 Total oil capacity including tubes, filters 9 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender Hot parts protection Moving parts protection LOP sender (Optional)

Alternator

Generator: STAMFORD Model: UCI274C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-leakage chassis, predisposed to retain liquids (retention tray) Manhole for fuel tank cleaning and drainage Tilting cap in the exhaust Manhole to fill the radiator Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Oil sump extraction kit Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Mechanized for power cable output Door with window to visualize control panel, alarms and measurements Pressure locks IP Protection according to ISO 8528-13:2016

Installation

- ELECTRICAL SYSTEM. Power panel with built-in circuit breaker plates Safety relay in output terminal board (thermal magnetic trip and alarm in control unit) Battery Switch M12 control panel with electronic DSE 7310 control unit and switched emergency stop Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 740 ºC Maximum allowed back pressure: 220 mbar - NECESSARY AMOUNT OF AIR. Alternator fan air flow: 0,514 m3/s - STARTING SYSTEM. Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 450 L Other fuel tank capacities: 850 L

Dimensions

- DIMENSIONS. Length: 2.960 mm Height: 1.900 mm Width: 1.200 mm Maximum shipping volume: 6,75 m3 Weight with liquids in radiator and sump: 2.171 kg Fuel tank capacity: 450 L Autonomy: 24 Hours Sound pressure level: 65 ± 2,4 dB(A)@7m