Engine
Engine Specifications 1.500 r.p.m.
Rated Engine Output: 630kW cop
Manufacturer: GUASCOR
Model: G.36SL
Engine Type: 4-stroke Otto Cycle
Injection Type: Carburization
Aspiration Type: Turbocharged
Number of cylinders and arrangement: 12-V
Bore and Stroke: 152 x 165 mm
Displacement: 24 L
Cooling System: Water
Lube Oil Specifications: API CC or CD
Compression Ratio: 11,6
Fuel Consumption 100% PRP: 1571 kW
Fuel Consumption 80 % PRP: 1285 kW
Lube oil consumption with full load: 0,35
Total oil capacity including tubes, filters 174 L
Governor Type Electrical
Air Filter Type Dry
Biogas Engine
4-stroke cycle
Water-cooled
Radiator with pusher fan
HTW sender
LOP sender
Hot parts protection
Moving parts protection
Alternator
Generator: STAMFORD
Model: S6L1D.D4
Poles: 4
Connection type (standard): Star-series
Mounting type: S-00 18"
Insulation: H class
Enclosure (according IEC-34-5): IP23
Voltage regulator: A.V.R. (Electronic)
Bracket type: Double drive-shaft
Coupling system: Elastic Coupling
Coating type: Standard (Vacuum impregnation)
Version
- OPEN SET VERSION.
Emergency stop button
Steel chassis
Steel industrial silencer -15db(A) attenuation
Steel residential silencer -35db(A) attenuation.
- GAS RAMP.
Manual shut-off valve
Double solenoid valve
High pressure regulator
Primary pressure regulator
Secondary pressure regulator (Zero pressure regulator)
Low pressure switch
High pressure switch
Valve (tightness) testing system
Inlet pressure manometer
Outlet pressure manometer
Special Start/Stop sequence
Installation
- ELECTRICAL SYSTEM.
Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
Battery Switch
Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
Battery charger (standard on gensets with automatic control panels)
Heating resistor (standard on sets with automatic control panels)
Battery charger alternator with ground connection
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
- EXHAUST SYSTEM.
Maximum exhaust temperature: 372 ºC
Exhaust Gas Flow: 0,93 kg/s
Maximum allowed back pressure: 450 mm H2o
- NECESSARY AMOUNT OF AIR.
Intake air flow: 3190 m3/h
Cooling Air Flow: 12,25 m3/s
Alternator fan air flow: 1,42 m3/s
- STARTING SYSTEM.
Recommended battery: 280 Ah
Auxiliary Voltage: 12 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: Biogas
