Engine
Engine Specifications 1.500 r.p.m.
Rated Engine Output: 415kW prp ; 464kW standby
Manufacturer: PSI
Model: 40L
Engine Type: 4-stroke Otto Cycle
Injection Type: Direct
Aspiration Type: Turbocharged and after-cooled
Number of cylinders and arrangement: 12-V
Bore and Stroke: 150 x 185 mm
Displacement: 39,2 L
Cooling System: Coolant
Lube Oil Specifications: SAE 15W40; API CD or CE
Compression Ratio: 10,5:1
Fuel Consumption ESP: 1582 kW
Fuel Consumption 100% PRP: 1484 kW
Fuel Consumption 75 % PRP: 1046 kW
Fuel Consumption 50 % PRP: 753 kW
Fuel Consumption 25 % PRP: 511 kW
Total oil capacity: 146 L
Total coolant capacity: 172 L
Governor Type Electrical
Air Filter Type Dry
LPG-liquefied petrol gas engine
4-stroke cycle
Water-cooled
Radiator with pusher fan
HTW sender
LOP sender
Hot parts protection
Moving parts protection
Alternator
Generator: MECC ALTE
Model: ECO40.3S4C
Poles: 4
Connection type (standard): Star-series
Mounting type: S-0 18''
Insulation: H class
Enclosure (according IEC-34-5): IP23
Exciter system: Self-excited, brushless
Voltage regulator: A.V.R. (Electronic)
Bracket type: Single bearing
Coupling system: Flexible disc
Coating type: Standard (Vacuum impregnation)
Version
- OPEN SET VERSION.
Emergency stop button
Steel chassis
Anti-vibration shock absorbers
Steel industrial silencer -15db(A) attenuation
Steel residential silencer -35db(A) attenuation.
- GAS RAMP.
Manual shut-off valve
Gas filter
Double solenoid valve
High pressure regulator
Primary pressure regulator
Low pressure switch
High pressure switch
Valve (tightness) testing system
Inlet pressure manometer
Outlet pressure manometer
Special Start/Stop sequence
Installation
- ELECTRICAL SYSTEM.
Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
Battery Switch
Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
Water Jacket Heater with single phase pump
Heating resistor (standard on sets with automatic control panels)
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
- EXHAUST SYSTEM.
Maximum exhaust temperature: 633 ºC
Exhaust Gas Flow: 75 m3/min
Maximum allowed back pressure: 13 kPa
- NECESSARY AMOUNT OF AIR.
Intake air flow: 1500 m3/h
- STARTING SYSTEM.
Starting power: 10 kW
Starting power: 13,6 CV
Recommended battery: 75 x 4 Ah
Auxiliary Voltage: 24 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: LPG
Dimensions
- DIMENSIONS.
Length: 4.500 mm
Height: 2.400 mm
Width: 2.200 mm
Maximum shipping volume: 23,76 m3
