Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 269,6kW cop ; 342,6kW prp ; 377,6kW standby Manufacturer: FPT_IVECO Model: C13TE2F Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 135 x 150 mm Displacement: 12,88 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 16,5:1 Fuel Consumption ESP: 97,4 l/h Fuel Consumption 100% PRP: 92,9 l/h Fuel Consumption 80 % PRP: 81 l/h Fuel Consumption 50 % PRP: 53 l/h Lube oil consumption with full load: 0,2 % of fuel consumption Total oil capacity including tubes, filters 35 L Total coolant capacity: 67 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECO38 3L/4 A Poles: 4 Connection type (standard): Star-series Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Oil sump extraction kit Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge High mechanical strength Epoxy polyester powder coating Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 520 ºC Maximum allowed back pressure: 5 kPa Heat dissipated by exhaust pipe: 591 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 1770 m3/h Cooling Air Flow: 9,1 m3/s Alternator fan air flow: 0,533 m3/s - STARTING SYSTEM. Starting power: 5,5 kW Starting power: 7,48 CV Recommended battery: 185 x 2 Ah Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 597 L

Dimensions

- DIMENSIONS. Length: 3.310 mm Height: 1.783 mm Width: 1.390 mm Maximum shipping volume: 8,2 m3 Weight with liquids in radiator and sump: 2.837 kg Fuel tank capacity: 597 L Autonomy: 7 Hours