Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 354,1kW prp ; 388,9kW standby Manufacturer: FPT_IVECO Model: C13TE3A Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 135 x 150 mm Displacement: 12,9 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 16,5 : 1 Fuel Consumption ESP: 100,5 l/h Fuel Consumption 100% PRP: 85,8 l/h Fuel Consumption 80 % PRP: 70,4 l/h Fuel Consumption 50 % PRP: 42,8 l/h Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 35 L Total coolant capacity: 68 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 108 mm Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: STAMFORD Model: S4L1D.E41 Poles: 4 Connection type (standard): Star-series Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-vibration shock absorbers Fuel tank Fuel level gauge External emergency stop switch Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Watertight chassis (acts as a double barrier against liquid retention) Fuel tank drain plug Chassis drain plug Chassis ready for future mobile kit installation Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Versatility to assemble a high capacity chassis with a metallic fuel tank IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 445 ºC Exhaust Gas Flow: 0,613 kg/s Maximum allowed back pressure: 5 kPa Exhaust Flange Size (external diameter): 140 mm Heat dissipated by exhaust pipe: 703 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 1770 m3/h Cooling Air Flow: 6,8 m3/s Alternator fan air flow: 0,8 m3/s - STARTING SYSTEM. Starting power: 6 kW Starting power: 8,16 CV Recommended battery: 185 x 2 Ah Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 597 L

Dimensions

- DIMENSIONS. Length: 5.252 mm Height: 2.613 mm Width: 2.210 mm Maximum shipping volume: 30,33 m3 Weight with liquids in radiator and sump: 4.790 kg Fuel tank capacity: 597 L Autonomy: 8 Hours Sound pressure level: 68 ± 2,4 dB(A)@7m