Engine
Engine Specifications 1.800 r.p.m.
Rated Engine Output: 148kW cop ; 188kW prp ; 208kW standby
Manufacturer: FPT_IVECO
Model: N67.TE3PV
Engine Type: 4-stroke diesel
Injection Type: Direct, common rail
Aspiration Type: Turbocharged and after-cooled
Number of cylinders and arrangement: 6-L
Bore and Stroke: 104 x 132 mm
Displacement: 6,7 L
Cooling System: Coolant
Lube Oil Specifications: 10W40 CJ4 / CK4 ACEA E9
Compression Ratio: 16,5:1
Fuel Consumption ESP: 52,2 l/h
Fuel Consumption 100% PRP: 48,8 l/h
Fuel Consumption 80 % PRP: 40,7 l/h
Fuel Consumption 50 % PRP: 27,3 l/h
Fuel Consumption 25 % PRP: 7,2 l/h
Lube oil consumption with full load: 0,3 % of fuel consumption
Total oil capacity including tubes, filters 17 L
Total coolant capacity: 36,2 L
Governor Type Electrical
Air Filter Type Dry
Diesel engine
4-stroke cycle
Water-cooled
12V electrical system
Water separator filter (no visible level)
Dry air filter
Radiator with pusher fan
Radiator water level sensor
HTW sender
LOP sender
Hot parts protection
Moving parts protection
Alternator
Generator: MECC ALTE
Model: ECO38.2S4C
Poles: 4
Connection type (standard): Star-series
Mounting type: S-1 14"
Insulation: H class
Enclosure (according IEC-34-5): IP23
Exciter system: Self-excited, brushless
Voltage regulator: A.V.R. (Electronic)
Bracket type: Single bearing
Coupling system: Flexible disc
Coating type: Standard (Vacuum impregnation)
Version
- OPEN SET VERSION.
Steel chassis
Emergency stop button
Oil sump extraction kit
Anti-vibration shock absorbers
Chassis with integrated fuel tank
Fuel level gauge
Fuel tank drain plug
Steel industrial silencer -15db(A) attenuation
Fuel transfer pump (Optional)
Steel residential silencer -35db(A) attenuation. (Optional)
Installation
- ELECTRICAL SYSTEM.
Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
Battery Switch
Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
Battery charger (standard on gensets with automatic control panels)
Heating resistor (standard on sets with automatic control panels)
Battery charger alternator with ground connection
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
- EXHAUST SYSTEM.
Maximum exhaust temperature: 600 ºC
Maximum allowed back pressure: 20 kPa
- NECESSARY AMOUNT OF AIR.
Alternator fan air flow: 0,65 m3/s
- STARTING SYSTEM.
Auxiliary Voltage: 12 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: Diesel
Fuel Tank: 250 L
Dimensions
- DIMENSIONS.
Length: 2.900 mm
Height: 1.634 mm
Width: 900 mm
Maximum shipping volume: 4,26 m3
Weight with liquids in radiator and sump: 1.493 kg
Fuel tank capacity: 250 L
Autonomy: 6 Hours
