Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 97,5kW prp ; 107,2kW standby Manufacturer: FPT_IVECO Model: NEF45TM2A Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 4-L Bore and Stroke: 104 x 132 mm Displacement: 4,5 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 17,5 : 1 Fuel Consumption ESP: 29 l/h Fuel Consumption 100% PRP: 26,3 l/h Fuel Consumption 80 % PRP: 19,6 l/h Fuel Consumption 50 % PRP: 13,5 l/h Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 12,8 L Total coolant capacity: 18,5 L Governor Type Mechanical Air Filter Type Dry Inner diameter exhaust pipe: 70,3 mm Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Hot parts protection Moving parts protection Radiator water level sensor (Optional) HTW sender (Optional) LOP sender (Optional)

Alternator

Generator: MECC ALTE Model: ECP34.2S4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Oil sump extraction kit Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Battery Switch (Optional) - EXHAUST SYSTEM. Maximum exhaust temperature: 540 ºC Exhaust Gas Flow: 0,176 kg/s Maximum allowed back pressure: 5 kPa Heat dissipated by exhaust pipe: 785,3 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 507 m3/h Cooling Air Flow: 2,6 m3/s Alternator fan air flow: 0,573 m3/s - STARTING SYSTEM. Starting power: 3 kW Starting power: 4,08 CV Recommended battery: 100 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 145 L

Dimensions

- DIMENSIONS. Length: 2.150 mm Height: 1.500 mm Width: 780 mm Maximum shipping volume: 2,52 m3 Weight with liquids in radiator and sump: 1.109 kg Fuel tank capacity: 145 L Autonomy: 7 Hours