Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 71,9kW cop ; 89,9kW prp ; 98,9kW standby Manufacturer: FPT_IVECO Model: N45.TE2P Engine Type: 4-stroke diesel Injection Type: Direct, common rail Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 4-L Bore and Stroke: 104 x 132 mm Displacement: 4,5 L Cooling System: Coolant Lube Oil Specifications: SAE 15W40-CLASS T2; ACEA E7/04 Compression Ratio: 17,5:1 Fuel Consumption ESP: 24,2 l/h Fuel Consumption 100% PRP: 22,3 l/h Fuel Consumption 80 % PRP: 18,2 l/h Fuel Consumption 50 % PRP: 11,9 l/h Lube oil consumption with full load: 0,1 % of fuel consumption Total oil capacity including tubes, filters 12,8 L Total coolant capacity: 18,5 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 12V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECP34.2S4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Oil sump extraction kit Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge High mechanical strength Epoxy polyester powder coating Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum allowed back pressure: 10 kPa Heat dissipated by exhaust pipe: 608 KCal/Kwh - NECESSARY AMOUNT OF AIR. Alternator fan air flow: 0,487 m3/s - STARTING SYSTEM. Recommended battery: 44 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 170 L

Dimensions

- DIMENSIONS. Length: 2.450 mm Height: 1.485 mm Width: 780 mm Maximum shipping volume: 2,84 m3 Weight with liquids in radiator and sump: 1.123 kg Fuel tank capacity: 170 L Autonomy: 9 Hours