Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 436kW prp ; 476kW standby Manufacturer: BAUDOUIN Model: 6M21G8D0.S Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 127×165 mm Displacement: 12,54 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: API CI-4 or ACEA E7 Compression Ratio: 15.2:1 Fuel Consumption ESP: 123,1 l/h Fuel Consumption 100% PRP: 109,5 l/h Fuel Consumption 75 % PRP: 75,3 l/h Fuel Consumption 50 % PRP: 51 l/h Fuel Consumption 25 % PRP: 27,8 l/h Lube oil consumption with full load: 0,2 % of fuel consumption Total oil capacity including tubes, filters 40 L Total coolant capacity: 25 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 100 mm Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (no visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECO40.3S4C Poles: 4 Connection type (standard): Star - Parallel Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Oil sump extraction kit Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge High mechanical strength Epoxy polyester powder coating Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 580 ºC Exhaust Gas Flow: 102,3 m3/min Maximum allowed back pressure: 120 mbar - NECESSARY AMOUNT OF AIR. Cooling Air Flow: 7,9 m3/s - STARTING SYSTEM. Starting power: 8,7 kW Starting power: 11,83 CV - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 740 L

Dimensions

- DIMENSIONS. Length: 3.600 mm Width: 1.460 mm Fuel tank capacity: 740 L Autonomy: 10 Hours