Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 25,9kW cop ; 28,4kW prp Manufacturer: YANMAR Model: 4GPF98C3Y Engine Type: 4-stroke Miller Cycle Injection Type: Carburization Aspiration Type: Natural Number of cylinders and arrangement: 4-L Bore and Stroke: 98 x 110 mm Displacement: 3,319 L Cooling System: Water Lube Oil Specifications: JX T oil for Yanmar genuine GHP (10W30) Compression Ratio: 12:1 Total oil capacity: 27 L Total coolant capacity: 12,5 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 52 mm Use and maintenance instruction manual Tubular steel chassis with anti-vibration rubber shock absorbers Electronic management (ADEC) Oil temperature sensor Low coolant level sensor Exhaust gas compensator Air Filter Restriction Indicator Natural Gas engine 4-stroke cycle Water-cooled 12V electrical system Standard air filter Standard oil filter Dry air filter (heavy duty) Radiator with pusher fan (vertical configuration) Remote radiator Radiator water level sensor 50º tropicalized radiator HTW sender LOP sender Hot parts protection Moving parts protection Dual frequency engine 50/60 Hz (Optional) LPG-liquefied petrol gas engine (Optional) LPG Engine (Optioon of working with NG, to consult) (Optional)

Alternator

Generator: HIMOINSA Model: HA14G Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Tilting cap in the exhaust Steel chassis Manhole to fill the radiator Aditional silencer Side auxiliary cable outlet with aluminum cover Manual oil extraction pump Wide access to the engine compartment because of a removable door Fuel tank raiser Manual oil drain pump Full access for maintenance (water, oil and filters, no need to remove the canopy) Oil sump extraction kit Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Door with window to visualize control panel, alarms and measurements Pressure locks Anti-leakage chassis, predisposed to retain liquids (retention tray) (Optional) Snow Hood (Optional) 4 side lifting points (Optional) Retention Tray (Optional) - GAS RAMP. Manual shut-off valve Gas filter Double solenoid valve Secondary pressure regulator (Zero pressure regulator) Gas pressure regulator Low pressure switch Inlet pressure manometer Outlet pressure manometer Special Start/Stop sequence Leak gas detection sensor (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Battery charger Water Jacket Heater - EXHAUST SYSTEM. Maximum exhaust temperature: 602 ºC Maximum allowed back pressure: 14,7 kPa - NECESSARY AMOUNT OF AIR. Intake air flow: 132,012 m3/h Cooling Air Flow: 0,56 m3/s Alternator fan air flow: 0,122 m3/s - STARTING SYSTEM. Starting power: 2,3 kW Starting power: 3,13 CV Recommended battery: 44 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: LPG

Dimensions

- DIMENSIONS. Length: 2.250 mm Height: 1.400 mm Width: 910 mm Maximum shipping volume: 2,87 m3 Sound pressure level: 56 ± 2,4 dB(A)@7m