HSW-450 T5

Power Solutions / DC RANGE

HSW-450 T5

Open Skid

Prime power450 kVA
Standby power491 kVA

TECHNICAL DATA

Specifications

Model code
G-514-7-3-3
Engine
SCANIA
Alternator
MECC ALTE
Fuel
Diesel
Frequency
50 Hz
Phase
Three phase
Emissions
non certified
Version
Open Skid
Prime power
360 kW
Standby power
393 kW

CONFIGURATION

Available voltages

VoltageFrequencyPhaseAlternatorDatasheet
400/230 V 50 Hz Three phase MECC ALTE
200/115 V 50 Hz Three phase MECC ALTE
230 V (t) 50 Hz Three phase MECC ALTE

INCLUDED

Equipment

Engine

Engine Specifications 1.500 r.p.m. Rated Engine Output: 393kW prp ; 428kW standby Manufacturer: SCANIA Model: DC13-72A(02-13) Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 130 x 160 mm Displacement: 12,7 L Cooling System: Coolant Lube Oil Specifications: ACEA E3,E4,E5 or E7 Compression Ratio: 16,3:1 Fuel Consumption ESP: 97,79 l/h Fuel Consumption 100% PRP: 87,16 l/h Fuel Consumption 75 % PRP: 64,32 l/h Fuel Consumption 50 % PRP: 43,35 l/h Lube oil consumption with full load: 0,3 Total oil capacity: 38 L Total coolant capacity: 38 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 90 mm Diesel engine 4-stroke cycle Water-cooled 24V electrical system Water separator filter (visible level) Dry air filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECO40.2S4C Poles: 4 Connection type (standard): Star-series Mounting type: S-1 14" Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- OPEN SET VERSION. Steel chassis Emergency stop button Oil sump extraction kit Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge Fuel tank drain plug Steel industrial silencer -15db(A) attenuation Fuel transfer pump (Optional) Steel residential silencer -35db(A) attenuation. (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 536 ºC Exhaust Gas Flow: 0,567 kg/s Maximum allowed back pressure: 100 mbar Heat dissipated by exhaust pipe: 607,14 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 1600 m3/h Cooling Air Flow: 9,58 m3/s Alternator fan air flow: 0,9 m3/s - STARTING SYSTEM. Starting power: 5,5 kW Starting power: 7,48 CV Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 740 L

Dimensions

- DIMENSIONS. Length: 3.600 mm Height: 2.090 mm Width: 1.460 mm Maximum shipping volume: 10,99 m3 Weight with liquids in radiator and sump: 2.917 kg Fuel tank capacity: 740 L Autonomy: 12 Hours