Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 228,7kW prp ; 252,7kW standby Manufacturer: FPT_IVECO Model: N67.TE8P Engine Type: 4-stroke diesel Injection Type: Direct, common rail Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 104 x 132 mm Displacement: 6,7 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: 10W-40 (API CJ-4, CK-4) Compression Ratio: 17:1 Fuel Consumption ESP: 63,81 l/h Fuel Consumption 100% PRP: 55,83 l/h Fuel Consumption 80 % PRP: 44,64 l/h Fuel Consumption 50 % PRP: 28,81 l/h Fuel Consumption 25 % PRP: 16,19 l/h Lube oil consumption with full load: 0,3 % of fuel consumption Total oil capacity including tubes, filters 17 L Total coolant capacity: 27,6 L Governor Type Electrical Air Filter Type Dry Diesel engine 4-stroke cycle Water-cooled 24V electrical system Dry air filter Radiator with pusher fan Hot parts protection Moving parts protection Water separator filter with sensor (Optional) Water separator filter (no visible level) (Optional)

Alternator

Generator: MECC ALTE Model: ECO38.2M4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation) Generator: MECC ALTE Model: ECO38.2M4C Poles: 4 Connection type (standard): Star - Parallel Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Galvanized slide carriage and brackets for transportation with forklift Lower power cable outlet with aluminum cover Side auxiliary cable outlet with aluminum cover Fuel tank in retention tray Soundproofing with foam and polyurethane film 4 side lifting points Anti-vibration shock absorbers Fuel tank Fuel level gauge External emergency stop switch Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Oil sump extraction kit Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) Door with window to visualize control panel, alarms and measurements Pressure locks IP Protection according to ISO 8528-13:2016 Manual oil extraction pump (Optional) 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Battery Switch Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Optional Battery (Optima) (Optional) - EXHAUST SYSTEM. Maximum allowed back pressure: 0,02 kPa - NECESSARY AMOUNT OF AIR. Intake air flow: 775,6 m3/h Cooling Air Flow: 3,97 m3/s Alternator fan air flow: 0,65 m3/s - STARTING SYSTEM. - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 400 L

Dimensions

- DIMENSIONS. Length: 4.200 mm Height: 2.210 mm Width: 1.360 mm Maximum shipping volume: 12,62 m3 Weight with liquids in radiator and sump: 2.560 kg Fuel tank capacity: 400 L Autonomy: 9 Hours Sound pressure level: 68 ± 2,4 dB(A)@7m