Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 119,6kW cop ; 151kW prp ; 166,7kW standby Manufacturer: FPT_IVECO Model: N67.TM3A Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 6-L Bore and Stroke: 104 x 132 mm Displacement: 6,7 L Cooling System: Water Lube Oil Specifications: ACEA E3 - E5 Compression Ratio: 17,5 : 1 Fuel Consumption ESP: 44,2 l/h Fuel Consumption 100% PRP: 40,1 l/h Fuel Consumption 80 % PRP: 32,5 l/h Fuel Consumption 50 % PRP: 20,7 l/h Lube oil consumption with full load: 0,5 % of fuel consumption Total oil capacity including tubes, filters 17,2 L Total coolant capacity: 25,5 L Governor Type Mechanical Air Filter Type Dry Inner diameter exhaust pipe: 70 mm Diesel engine 4-stroke cycle Water-cooled 12V electrical system Dry air filter Radiator with pusher fan Hot parts protection Moving parts protection 24V electrical system (Optional)

Alternator

Generator: MECC ALTE Model: ECP34.1L4C Poles: 4 Connection type (standard): Star-series Mounting type: S-3 11"1/2 Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Modular tank and retention tray system. Allows easy removal and / or maintenance of the equipment Fuel tank in retention tray Soundproofing with foam and polyurethane film 4 side lifting points Side auxiliary cable outlet with aluminum cover Anti-vibration shock absorbers Fuel tank Fuel level gauge Bodywork made from high quality steel plate High mechanical strength Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) IP Protection according to ISO 8528-13:2016 Manual oil extraction pump (Optional) Noise reduction kit (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Adjustable earth leakage protection Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Battery Switch (Optional) Leakage detector (Optional) Optional Battery (Optima) (Optional) - EXHAUST SYSTEM. Maximum exhaust temperature: 541 ºC Exhaust Gas Flow: 0,252 kg/s Maximum allowed back pressure: 5 kPa Exhaust Flange Size (external diameter): 90 mm Heat dissipated by exhaust pipe: 711 KCal/Kwh - NECESSARY AMOUNT OF AIR. Intake air flow: 723 m3/h Cooling Air Flow: 4,8 m3/s Alternator fan air flow: 0,573 m3/s - STARTING SYSTEM. Starting power: 3 kW Starting power: 4,08 CV Recommended battery: 100 Ah Auxiliary Voltage: 12 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 240 L

Dimensions

- DIMENSIONS. Length: 3.550 mm Height: 1.870 mm Width: 1.150 mm Maximum shipping volume: 7,63 m3 Weight with liquids in radiator and sump: 1.759 kg Fuel tank capacity: 240 L Autonomy: 7 Hours