Engine
Engine Specifications 1.500 r.p.m.
Rated Engine Output: 1240kW cop
Manufacturer: GUASCOR
Model: G.56HM
Engine Type: 4-stroke Otto Cycle
Injection Type: Carburization
Aspiration Type: Turbocharged
Number of cylinders and arrangement: 16-V
Bore and Stroke: 160 x 175 mm
Displacement: 56,3 L
Cooling System: Water + Antifreeze
Lube Oil Specifications: SAE 40
Compression Ratio: 11,9
Fuel Consumption 100% PRP: 2949 kW
Fuel Consumption 80 % PRP: 2391 kW
Fuel Consumption 75 % PRP: 2272 kW
Fuel Consumption 50 % PRP: 1619 kW
Fuel Consumption 25 % PRP: 955,1 kW
Lube oil consumption with full load: 0,15
Total oil capacity: 419 L
Governor Type Electrical
Air Filter Type In oil bath
Biogas Engine
4-stroke cycle
Water-cooled
Radiator with pusher fan
HTW sender
LOP sender
Hot parts protection
Moving parts protection
Alternator
Generator: STAMFORD
Model: S7L1D.D4
Poles: 4
Connection type (standard): Star
Mounting type: S-00 18"
Insulation: H class
Enclosure (according IEC-34-5): IP23
Voltage regulator: A.V.R. (Electronic)
Bracket type: Double drive-shaft
Coupling system: Elastic Coupling
Coating type: Standard (Vacuum impregnation)
Version
- CONTAINER VERSION.
Soundproofing provided by high-density volcanic rock wool
High mechanical resistance
Low level of noise emissions
Door with window to visualize control panel, alarms and measurements
Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
Anti-vibration shock absorbers
Steel chassis
Manual oil extraction pump
Robust construction designed for continuous or emergency applications
Emergency stops
Easy access to the power connection
Reinforced chassis for heavy range
Easy access for chassis cleaning
- GAS RAMP.
Manual shut-off valve
Double solenoid valve
High pressure regulator
Primary pressure regulator
Secondary pressure regulator (Zero pressure regulator)
Low pressure switch
High pressure switch
Valve (tightness) testing system
Inlet pressure manometer
Outlet pressure manometer
Special Start/Stop sequence
Installation
- ELECTRICAL SYSTEM CONTAINER.
Control panel and emergency stop button
Power panel
Battery charger (standard on automatic control panels)
Heating resistor (standard on sets with automatic control panels)
Battery charge alternator with ground connection
Starter battery/ies installed (cables and bracket included)
Ground connection electrical installation with connection ready for ground spike (not supplied)
Battery isolator
- EXHAUST SYSTEM.
Maximum exhaust temperature: 420 ºC
Exhaust Gas Flow: 1,836 kg/s
Maximum allowed back pressure: 450 mm H2o
- NECESSARY AMOUNT OF AIR.
Intake air flow: 5800 m3/h
Cooling Air Flow: 24,11 m3/s
Alternator fan air flow: 2,63 m3/s
- STARTING SYSTEM.
Auxiliary Voltage: 12 Vdc
- FUEL SYSTEM
Fuel Oil Specifications: Biogas
Dimensions
- DIMENSIONS.
Length: 12.192 mm
Height: 2.896 mm
Width: 2.438 mm
Maximum shipping volume: 86,08 m3
