Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 773kW prp ; 853kW standby Manufacturer: HYUNDAI Model: DP222CB Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 12-V Bore and Stroke: 128 x 142 mm Displacement: 21,927 L Cooling System: Coolant Lube Oil Specifications: 10W-40 (API CJ-4, CK-4) Compression Ratio: 14,6:1 Fuel Consumption ESP: 216 l/h Fuel Consumption 100% PRP: 204 l/h Fuel Consumption 75 % PRP: 155 l/h Fuel Consumption 50 % PRP: 117 l/h Fuel Consumption 25 % PRP: 60 l/h Total oil capacity including tubes, filters 78 L Total coolant capacity: 66 L Governor Type Electrical Air Filter Type Dry Oil temperature sensor Low coolant level sensor Exhaust gas compensator Diesel engine 4-stroke cycle 24V electrical system Standard air filter Standard fuel filter Standard oil filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECO43.1S4A Poles: 4 Connection type (standard): Star - Parallel Mounting type: S-0 18'' Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Tilting cap in the exhaust Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge External emergency stop switch Bodywork made from high quality steel plate Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Chassis drain plug Steel residential silencer -35db(A) attenuation. Oil sump extraction kit Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork) 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Manual oil drain pump (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Connection panel wired to the safety protection (open thermal magnetic protection and alarm) Maintenance-free and anti-explosion battery Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) Water Jacket Heater (Optional) - EXHAUST SYSTEM. Maximum exhaust temperature: 470 ºC Exhaust Gas Flow: 152 m3/min Maximum allowed back pressure: 5,9 kPa - NECESSARY AMOUNT OF AIR. Cooling Air Flow: 25,17 m3/s Alternator fan air flow: 1,8 m3/s - STARTING SYSTEM. Starting power: 7 kW Starting power: 9,52 CV Recommended battery: 75 x 4 Ah Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Fuel Tank: 1.000 L

Dimensions

- DIMENSIONS. Length: 5.960 mm Height: 2.856 mm Width: 2.622 mm Maximum shipping volume: 44,63 m3 Weight with liquids in radiator and sump: 7.989 kg Fuel tank capacity: 1.000 L Autonomy: 6 Hours