Engine

Engine Specifications 1.800 r.p.m. Rated Engine Output: 873,8kW prp ; 965,8kW standby Manufacturer: BAUDOUIN Model: 12M26G900.6 Engine Type: 4-stroke diesel Injection Type: Direct Aspiration Type: Turbocharged and after-cooled Number of cylinders and arrangement: 12-V Bore and Stroke: 150 x 150 mm Displacement: 31,8 L Cooling System: Liquid (water + 50% glycol) Lube Oil Specifications: API CI-4 or ACEA E7 Compression Ratio: 15,7:1 Fuel Consumption ESP: 242 l/h Fuel Consumption 100% PRP: 217,3 l/h Fuel Consumption 75 % PRP: 164 l/h Fuel Consumption 50 % PRP: 113,9 l/h Fuel Consumption 25 % PRP: 65,2 l/h Lube oil consumption with full load: 0,3 % of fuel consumption Total oil capacity including tubes, filters 114 L Total coolant capacity: 148 L Governor Type Electrical Air Filter Type Dry Inner diameter exhaust pipe: 200 mm Oil temperature sensor Low coolant level sensor Exhaust gas compensator Diesel engine 4-stroke cycle Water-cooled 24V electrical system Standard air filter Standard fuel filter Standard oil filter Radiator with pusher fan Radiator water level sensor HTW sender LOP sender Hot parts protection Moving parts protection

Alternator

Generator: MECC ALTE Model: ECO43.1S4A Poles: 4 Connection type (standard): Star - Parallel Mounting type: S-0 18'' Insulation: H class Enclosure (according IEC-34-5): IP23 Exciter system: Self-excited, brushless Voltage regulator: A.V.R. (Electronic) Bracket type: Single bearing Coupling system: Flexible disc Coating type: Standard (Vacuum impregnation)

Version

- SOUNDPROOFED VERSION. Steel chassis Anti-vibration shock absorbers Chassis with integrated fuel tank Fuel level gauge External emergency stop switch Bodywork made from high quality steel plate High mechanical strength Low noise emissions level Soundproofing provided by high-density volcanic rock wool Epoxy polyester powder coating Full access for maintenance (water, oil and filters, no need to remove the canopy) Reinforced lifting hooks for crane hoisting Chassis drain plug Steel residential silencer -35db(A) attenuation. Oil sump extraction kit IP Protection according to ISO 8528-13:2016 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional) Fuel transfer pump (Optional)

Installation

- ELECTRICAL SYSTEM. Electric control and power panel with measurements devices and control unit (according to necessity and configuration) Connection panel wired to the safety protection (open thermal magnetic protection and alarm) Maintenance-free and anti-explosion battery Battery Switch Battery charger (standard on gensets with automatic control panels) Heating resistor (standard on sets with automatic control panels) Battery charger alternator with ground connection Starter battery/ies installed (cables and bracket included) Ground connection electrical installation with connection ready for ground spike (not supplied) - EXHAUST SYSTEM. Maximum exhaust temperature: 550 ºC Exhaust Gas Flow: 225,5 m3/min Maximum allowed back pressure: 75 mbar Exhaust Flange Size (external diameter): 200 mm - NECESSARY AMOUNT OF AIR. Intake air flow: 5166 m3/h Cooling Air Flow: 18 m3/s Alternator fan air flow: 1,8 m3/s - STARTING SYSTEM. Starting power: 10 kW Starting power: 13,6 CV Auxiliary Voltage: 24 Vdc - FUEL SYSTEM Fuel Oil Specifications: Diesel Maximum power suction pump: 375 mm Hg Maximum return feed pump: 375 mm Hg Fuel Tank: 1.000 L

Dimensions

- DIMENSIONS. Length: 5.960 mm Height: 2.856 mm Width: 2.622 mm Maximum shipping volume: 44,63 m3 Weight with liquids in radiator and sump: 9.952 kg Fuel tank capacity: 1.000 L Autonomy: 6 Hours